Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o
ALFATR-P ALFA TR-C
4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85
Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • •
Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • •
Two-hand controls • • • • • • • •
Provision for remote control • • • • • • • •
Work area illumination • • • • • • • •
Built-in safety devices • • • • • • • •
Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - -
Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • •
Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - -
Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - -
Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • •
Four TR-12A (traub 25) collet chucks • - - - • - - -
Four M110 vices with interchangeable jaws - • - - - • - -
Eight TR-10B collet chucks (Up to traub 20) - - • - - - • -
Eight M85 vices with interchangeable jaws - - - • - - - •
Inverter o o o o • • • •
Chip bin • • • • • • • •
Coolant tank with pump** o o o o o o o o
Set of keys • • • • • • • •
Workpiece jaws o o o o o o o o
Automatic chip removal o o o o o o o o
Work spindles o o o o o o o o
Lead screw and bronze nut for threading machine o o o o - - - -
Speed reduction gear on the work unit o o o o o o o o
Tap holder with compensator - - - - o o o o
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o
ALFATR-P ALFA TR-C
4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85
Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • •
Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • •
Two-hand controls • • • • • • • •
Provision for remote control • • • • • • • •
Work area illumination • • • • • • • •
Built-in safety devices • • • • • • • •
Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - -
Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • •
Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - -
Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - -
Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • •
Four TR-12A (traub 25) collet chucks • - - - • - - -
Four M110 vices with interchangeable jaws - • - - - • - -
Eight TR-10B collet chucks (Up to traub 20) - - • - - - • -
Eight M85 vices with interchangeable jaws - - - • - - - •
Inverter o o o o • • • •
Chip bin • • • • • • • •
Coolant tank with pump** o o o o o o o o
Set of keys • • • • • • • •
Workpiece jaws o o o o o o o o
Automatic chip removal o o o o o o o o
Work spindles o o o o o o o o
Lead screw and bronze nut for threading machine o o o o - - - -
Speed reduction gear on the work unit o o o o o o o o
Tap holder with compensator - - - - o o o o
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o
Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o
ALFATR-P ALFA TR-C
4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85
Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • •
Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • •
Two-hand controls • • • • • • • •
Provision for remote control • • • • • • • •
Work area illumination • • • • • • • •
Built-in safety devices • • • • • • • •
Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - -
Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • •
Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - -
Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - -
Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • •
Four TR-12A (traub 25) collet chucks • - - - • - - -
Four M110 vices with interchangeable jaws - • - - - • - -
Eight TR-10B collet chucks (Up to traub 20) - - • - - - • -
Eight M85 vices with interchangeable jaws - - - • - - - •
Inverter o o o o • • • •
Chip bin • • • • • • • •
Coolant tank with pump** o o o o o o o o
Set of keys • • • • • • • •
Workpiece jaws o o o o o o o o
Automatic chip removal o o o o o o o o
Work spindles o o o o o o o o
Lead screw and bronze nut for threading machine o o o o - - - -
Speed reduction gear on the work unit o o o o o o o o
Tap holder with compensator - - - - o o o o
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.
| Accessori: • = standard; o = optional; - = not available; ALFATR-P ALFA TR-C 4/TR 12A 4/M 110 8/TR 10B 8/M 85 4/TR 12A 4/M 110 8/TR 10B 8/M 85 Electric control equipment with manual controls and integrated semiautomatic controls • • • • • • • • Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions • • • • • • • • Two-hand controls • • • • • • • • Provision for remote control • • • • • • • • Work area illumination • • • • • • • • Built-in safety devices • • • • • • • • Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard • • • • - - - - Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard - - - - • • • • Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle • • • • - - - - Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle • • • • - - - - Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm - - - - • • • • Four TR-12A (traub 25) collet chucks • - - - • - - - Four M110 vices with interchangeable jaws - • - - - • - - Eight TR-10B collet chucks (Up to traub 20) - - • - - - • - Eight M85 vices with interchangeable jaws - - - • - - - • Inverter o o o o • • • • Chip bin • • • • • • • • Coolant tank with pump** o o o o o o o o Set of keys • • • • • • • • Workpiece jaws o o o o o o o o Automatic chip removal o o o o o o o o Work spindles o o o o o o o o Lead screw and bronze nut for threading machine o o o o - - - - Speed reduction gear on the work unit o o o o o o o o Tap holder with compensator - - - - o o o o | ||||||||
| ALFATR-P | ALFA TR-C | |||||||
| 4/TR 12A | 4/M 110 | 8/TR 10B | 8/M 85 | 4/TR 12A | 4/M 110 | 8/TR 10B | 8/M 85 | |
| Electric control equipment with manual controls and integrated semiautomatic controls | • | • | • | • | • | • | • | • |
| Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions | • | • | • | • | • | • | • | • |
| Two-hand controls | • | • | • | • | • | • | • | • |
| Provision for remote control | • | • | • | • | • | • | • | • |
| Work area illumination | • | • | • | • | • | • | • | • |
| Built-in safety devices | • | • | • | • | • | • | • | • |
| Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard | • | • | • | • | - | - | - | - |
| Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard | - | - | - | - | • | • | • | • |
| Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle | • | • | • | • | - | - | - | - |
| Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle | • | • | • | • | - | - | - | - |
| Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm | - | - | - | - | • | • | • | • |
| Four TR-12A (traub 25) collet chucks | • | - | - | - | • | - | - | - |
| Four M110 vices with interchangeable jaws | - | • | - | - | - | • | - | - |
| Eight TR-10B collet chucks (Up to traub 20) | - | - | • | - | - | - | • | - |
| Eight M85 vices with interchangeable jaws | - | - | - | • | - | - | - | • |
| Inverter | o | o | o | o | • | • | • | • |
| Chip bin | • | • | • | • | • | • | • | • |
| Coolant tank with pump** | o | o | o | o | o | o | o | o |
| Set of keys | • | • | • | • | • | • | • | • |
| Workpiece jaws | o | o | o | o | o | o | o | o |
| Automatic chip removal | o | o | o | o | o | o | o | o |
| Work spindles | o | o | o | o | o | o | o | o |
| Lead screw and bronze nut for threading machine | o | o | o | o | - | - | - | - |
| Speed reduction gear on the work unit | o | o | o | o | o | o | o | o |
| Tap holder with compensator | - | - | - | - | o | o | o | o |
Accessori:
• = standard; o = optional; - = not available;
| ALFATR-P | ALFA TR-C | |||||||
| 4/TR 12A | 4/M 110 | 8/TR 10B | 8/M 85 | 4/TR 12A | 4/M 110 | 8/TR 10B | 8/M 85 | |
| Electric control equipment with manual controls and integrated semiautomatic controls | • | • | • | • | • | • | • | • |
| Programmable logic keyboard with workpiece counter, workpiece/lot counter, hourly average, cycle times and other functions | • | • | • | • | • | • | • | • |
| Two-hand controls | • | • | • | • | • | • | • | • |
| Provision for remote control | • | • | • | • | • | • | • | • |
| Work area illumination | • | • | • | • | • | • | • | • |
| Built-in safety devices | • | • | • | • | • | • | • | • |
| Integrated pneumatic system with gauges and pressure regulators for the drilling unit, rapid feed for the threading unit, chuck rotation and clamping, and a sliding guard | • | • | • | • | - | - | - | - |
| Integrated pneumatic system with gauges and pressure regulators for chuck rotation and clamping, and a sliding guard | - | - | - | - | • | • | • | • |
| Work unit series DP14/C, stroke 100 mm, ER25 fitting, 1.9/1.5kW 2/4 pole 2-speed motor, 1000/2000 rpm spindle | • | • | • | • | - | - | - | - |
| Work unit series T16/C, stroke 90 mm, 1.1kW 4-pole self-braking motor, 610 rpm spindle | • | • | • | • | - | - | - | - |
| Work unit series DE14/C, stroke 90 mm, 1.5kW 4-pole self-braking motor, inverter adjustment of spindle rpm | - | - | - | - | • | • | • | • |
| Four TR-12A (traub 25) collet chucks | • | - | - | - | • | - | - | - |
| Four M110 vices with interchangeable jaws | - | • | - | - | - | • | - | - |
| Eight TR-10B collet chucks (Up to traub 20) | - | - | • | - | - | - | • | - |
| Eight M85 vices with interchangeable jaws | - | - | - | • | - | - | - | • |
| Inverter | o | o | o | o | • | • | • | • |
| Chip bin | • | • | • | • | • | • | • | • |
| Coolant tank with pump** | o | o | o | o | o | o | o | o |
| Set of keys | • | • | • | • | • | • | • | • |
| Workpiece jaws | o | o | o | o | o | o | o | o |
| Automatic chip removal | o | o | o | o | o | o | o | o |
| Work spindles | o | o | o | o | o | o | o | o |
| Lead screw and bronze nut for threading machine | o | o | o | o | - | - | - | - |
| Speed reduction gear on the work unit | o | o | o | o | o | o | o | o |
| Tap holder with compensator | - | - | - | - | o | o | o | o |
The above specifications are merely indicative. In no case can Off. Mecc. Amici G. S.r.l. be held liable for direct or indirect damage caused. As the company aims at continual improvement, it reserves the right to modify the specifications at any time without notice.